Rogue RML-390BT Monster Lite Power Rack

Series: Rogue Monster Lite. Specs copied from the manufacturer page, last checked 2026-11-18.

Upright size3x3"
Hole diameter5/8"
Front hole spacingWestside: 1" through bench and clean pull zone, 2" above and below
Height90 3/8" (7' 6 3/8") — Gear specs list 90.375"
Footprint34" x 53"
Manufacturer notesRogue states the unit must be bolted to the floor. Hardware is 5/8".
Sourcehttps://www.roguefitness.com/rogue-rml-390bt-power-rack

View on manufacturer site

Attachment fit

AttachmentResultWhy
Rogue Monster Lite J-Cup Pair (Standard)Made for this rackThe manufacturer lists this attachment for the Rogue Monster Lite line.
Rogue Infinity J-Cup SetDoes not fitUpright size differs: attachment is for 2x3" uprights, rack is 3x3".
REP Fitness Round Sandwich J-Cups (4000 Series)Dimensional matchSame 3x3" upright and same 5/8" hole/pin size. Not confirmed by either manufacturer: check the J-cup or attachment wrap width against your upright before loading it.
Titan Fitness X-3 Series J-HooksUnknownSame 3x3" upright, but the manufacturer does not publish this attachment's pin diameter. Ask before buying.
REP Fitness Standard J-Cups 2.0 (5000 Series)Does not fitPin (1") is larger than the rack's holes (5/8").
Titan Fitness T-3 Series J-HooksDoes not fitUpright size differs: attachment is for 2x3" uprights, rack is 3x3".
REP Fitness Standard J-Cups (1000 Series)Does not fitUpright size differs: attachment is for 2x2" uprights, rack is 3x3".
Bells of Steel Sandwich J-Cups (Hydra, 3" x 3", 5/8" holes)UnknownSame 3x3" upright, but the manufacturer does not publish this attachment's pin diameter. Ask before buying.
Bells of Steel Sandwich J-Cups (Manticore, 3" x 3", 1" holes)UnknownSame 3x3" upright, but the manufacturer does not publish this attachment's pin diameter. Ask before buying.

"Dimensional match" means the published numbers line up. It is not a manufacturer guarantee. REP, for example, says it "cannot guarantee compatibility with other non-REP products."