Rogue Bolt-Together R-3 Power Rack

Series: Rogue Infinity (R-Series). Specs copied from the manufacturer page, last checked 2026-11-18.

Upright size2x3"
Hole diameter5/8"
Front hole spacingWestside: 1" through bench and clean pull zone, 2" above and below
Height90 3/8" (7' 6 3/8") — Gear specs list 90 3/8"; pull-up bar at 7' 6"
Footprint53" x 34" (24" depth) or 53" x 40" (30" depth)
Manufacturer notesRogue states the unit must be bolted to the floor.
Sourcehttps://www.roguefitness.com/rogue-r-3-power-rack

View on manufacturer site

Attachment fit

AttachmentResultWhy
Rogue Monster Lite J-Cup Pair (Standard)Does not fitUpright size differs: attachment is for 3x3" uprights, rack is 2x3".
Rogue Infinity J-Cup SetMade for this rackThe manufacturer lists this attachment for the Rogue Infinity (R-Series) line.
REP Fitness Round Sandwich J-Cups (4000 Series)Does not fitUpright size differs: attachment is for 3x3" uprights, rack is 2x3".
Titan Fitness X-3 Series J-HooksDoes not fitUpright size differs: attachment is for 3x3" uprights, rack is 2x3".
REP Fitness Standard J-Cups 2.0 (5000 Series)Does not fitUpright size differs: attachment is for 3x3" uprights, rack is 2x3".
Titan Fitness T-3 Series J-HooksUnknownSame 2x3" upright, but the manufacturer does not publish this attachment's pin diameter. Ask before buying.
REP Fitness Standard J-Cups (1000 Series)Does not fitUpright size differs: attachment is for 2x2" uprights, rack is 2x3".
Bells of Steel Sandwich J-Cups (Hydra, 3" x 3", 5/8" holes)Does not fitUpright size differs: attachment is for 3x3" uprights, rack is 2x3".
Bells of Steel Sandwich J-Cups (Manticore, 3" x 3", 1" holes)Does not fitUpright size differs: attachment is for 3x3" uprights, rack is 2x3".

"Dimensional match" means the published numbers line up. It is not a manufacturer guarantee. REP, for example, says it "cannot guarantee compatibility with other non-REP products."