Bells of Steel Hydra Four Post Power Rack (3" x 3", 5/8" Holes)
Series: Bells of Steel Hydra. Specs copied from the manufacturer page, last checked 2026-11-19.
| Upright size | 3x3" |
|---|---|
| Hole diameter | 5/8" |
| Front hole spacing | 1" in the bench zone, 2" elsewhere |
| Height | 72" or 84" or 108" — Bells of Steel lists 72", 84" and 108" upright heights |
| Footprint | Not stated in the text of the pages we checked |
| Manufacturer notes | Uprights are true 3" x 3" (76.2 mm), not 75 mm. Bells of Steel's Hydra assembly manual says bolting the rack to the floor is strongly recommended. |
| Source | https://support.bellsofsteel.com/en-US/what-are-the-dimensions-of-the-hydra-2888318 https://bellsofsteel.us/products/hydra-four-post-power-rack-builder https://bellsofsteel.com/cdn/shop/files/PM_HYDRA-RACK_-_2026.01.21-v2.pdf |
Attachment fit
| Attachment | Result | Why |
|---|---|---|
| Rogue Monster Lite J-Cup Pair (Standard) | Dimensional match | Same 3x3" upright and same 5/8" hole/pin size. Not confirmed by either manufacturer: check the J-cup or attachment wrap width against your upright before loading it. |
| Rogue Infinity J-Cup Set | Does not fit | Upright size differs: attachment is for 2x3" uprights, rack is 3x3". |
| REP Fitness Round Sandwich J-Cups (4000 Series) | Dimensional match | Same 3x3" upright and same 5/8" hole/pin size. Not confirmed by either manufacturer: check the J-cup or attachment wrap width against your upright before loading it. |
| Titan Fitness X-3 Series J-Hooks | Unknown | Same 3x3" upright, but the manufacturer does not publish this attachment's pin diameter. Ask before buying. |
| REP Fitness Standard J-Cups 2.0 (5000 Series) | Does not fit | Pin (1") is larger than the rack's holes (5/8"). |
| Titan Fitness T-3 Series J-Hooks | Does not fit | Upright size differs: attachment is for 2x3" uprights, rack is 3x3". |
| REP Fitness Standard J-Cups (1000 Series) | Does not fit | Upright size differs: attachment is for 2x2" uprights, rack is 3x3". |
| Bells of Steel Sandwich J-Cups (Hydra, 3" x 3", 5/8" holes) | Made for this rack | The manufacturer lists this attachment for the Bells of Steel Hydra line. |
| Bells of Steel Sandwich J-Cups (Manticore, 3" x 3", 1" holes) | Unknown | Same 3x3" upright, but the manufacturer does not publish this attachment's pin diameter. Ask before buying. |
"Dimensional match" means the published numbers line up. It is not a manufacturer guarantee. REP, for example, says it "cannot guarantee compatibility with other non-REP products."